The AM26LV32 device is a BiCMOS, quadruple differential line receiver with 3-state outputs, which is designed to be similar to the TIA/EIA-422-B and ITU Recommendation V.11 receivers with reduced common-mode voltage range due to reduced supply voltage.
●The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function is common to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range from –0.3 V to 5.5 V. When the inputs are open-circuit, the outputs are in the high logic state.
●The AM26LV32C is characterized for operation from 0°C to 70°C. The AM26LV32I is characterized for operation from –45°C to 85°C.
● Switching Rates Up to 32 MHz
● Operates From Single 3.3-V Supply
● Ultra-Low Power Dissipation: 27 mW Typical
● Open-Circuit, Short-Circuit, and Terminated Fail-Safe
● –0.3-V to 5.5-V Common-Mode Range With ±200-mV Sensitivity
● Accepts 5-V Logic Inputs With 3.3-V VCC
● Input Hysteresis: 50 mV Typical
● 235 mW With Four Receivers at 32 MHz
● Pin-to-Pin Compatible With AM26C32 and AM26LS32
