The TPS62082DSGT is a Step-down Converter with an input voltage range of 2.3 to 6V, common battery technologies are supported. Alternatively, the device can be used for low voltage system power rails. It focuses on high efficiency step-down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. To maintain high efficiency at very low load or no load currents, a Snooze Mode with an ultra-low quiescent current is implemented. This function, enabled by the mode pin, increases the run-time of battery driven applications and keeps the standby current at its lowest level to meet green energy standards targeting a low stand-by current. To address the requirements of system power rails, the internal loop compensation allows a large selection of external output capacitor values in excess of 100µF.
● DCS-Control™ Architecture for fast transient regulation
● Power save mode for light-load efficiency
● Output discharge function
● Short-circuit protection
● Power-good output
● Thermal shutdown
● 100% Duty cycle for lowest dropout
● Green product and no Sb/Br
