This CAN transceiver family meets the ISO11898-2 (2016) High Speed CAN (Controller Area Network) physical layer standard. All devices are designed for use in CAN FD networks up to 2 Mbps (megabits per second). Devices with part numbers that include the "G" suffix are designed for data rates up to 5 Mbps, and versions with the "V" have a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family has a low power standby mode with remote wake request feature. Additionally, all devices include many protection features to enhance device and network robustness.
● Meets the ISO 11898-2:2016 and
●ISO 11898-5:2007 Physical Layer Standards
● Turbo CAN:
● All Devices Support Classic CAN and 2 Mbps CAN FD (Flexible Data Rate) and "G" Options Support 5 Mbps
● Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
● Higher Data Rates in Loaded CAN Networks
● I/O Voltage Range Supports 3.3 V and 5 V MCUs
● Ideal Passive Behavior When Unpowered
● Bus and Logic Terminals are High Impedance (no load)
● Power Up/Down With Glitch Free Operation On Bus and RXD Output
● Protection Features
● HBM ESD Protection: ±16 kV
● IEC ESD Protection up to ±15 kV
● Bus Fault Protection: ±58 V (non-H variants) and ±70 V (H variants)
● Undervoltage Protection on VCC and VIO (V variants only) Supply Terminals
● Driver Dominant Time Out (TXD DTO) - Data rates down to 10 kbps
● Thermal Shutdown Protection (TSD)
● Receiver Common Mode Input Voltage: ±30 V
● Typical Loop Delay: 110 ns
● Junction Temperatures from –55°C to 150°C
● Available in SOIC(8) Package and Leadless VSON(8) Package (3.0 mm x 3.0 mm) with Improved Automated Optical Inspection (AOI) Capability
●All trademarks are the property of their respective owners.
