SN75HVD08DR Datasheet PDF - TI

The SN75HVD08DR is a RS-485 Wide Supply Range Transceiver for use with point-of-sale network. It combines a 3-state differential line driver and differential line receiver designed for balanced data transmission and interoperation with ANSI TIA/EIA-485-A and ISO-8482E standard-compliant devices. The wide supply voltage range and low quiescent current requirements allow the SN65HVD08s to operate from a 5V power bus in the cable with as much as a 2V line voltage drop. Busing power in the cable can alleviate the need for isolated power to be generated at each connection of a ground-isolated bus. The driver differential outputs and receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. The driver and receiver has active-high and active-low enables respectively, which can be externally connected together to function as a direction control.

● Open-circuit, idle-bus and shorted-bus failsafe receiver

● 1/8 Unit-load (up to 256 nodes on the bus)

● Bus-pin ESD protection exceeds 16kV HBM

● Driver output voltage slew-rate limited for optimum signal quality at 10Mbps

● Consumes less than 90mW quiescent power

● 256 Number of nodes

● Green product and no Sb/Br