SN74HCT125D Datasheet PDF - TI

The SN74HCT125D is a quadruple Bus Buffer Gate with 3-state outputs. It features independent line drivers with 3-state outputs. Each output is disabled when the associated OE\ input is high. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.

● High-current outputs drive up to 15 LSTTL loads

● Typical tpd = 12ns

● Inputs are TTL-voltage compatible

● High-current 3-state outputs drive bus lines or buffer memory address registers

● 80µA Maximum low power consumption

● ±6mA Output drive at 5V

● 1µA Maximum low input current

● Green product and no Sb/Br