| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 2.00 V to 6.00 V |
| Case/Package | DIP |
| Number of Outputs | 8 Output |
| Number of Circuits | 8 Circuit |
| Number of Bits | 6 Bit |
| Propagation Delay Max (tpd) | 25.0 ns |
| Voltage Nodes | 6.00 V, 5.00 V, 2.00 V |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The SN74HC541N is an Octal Buffer and Line Driver with 3-state outputs. This octal buffer and line driver features the performance of the HC240 device and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state outputs are controlled by a two-input NOR gate. If either output-enable (OE1\ or OE2\\) input is high, all eight outputs are in the high-impedance state. The HC541 device provides true data at the outputs.
● High-current 3-state outputs interface directly with system bus or can drive up to 15 LSTTL loads
● Data flow-through pinout (all inputs on opposite side from outputs)
● 80µA Maximum low power consumption
● 10ns Typical tpd
● ±6mA Output drive at 5V
● 1µA Maximum low input current
TI
Octal Buffers And Line Drivers With 3-state Outputs
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin PDIP Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
