| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 48 Pin |
| Supply Voltage (DC) | 2.30 V to 3.60 V |
| Case/Package | 48TSSOP |
| Output Current | 64.0 mA |
| Contacts Type | SPST |
| Supply Current | 250 mA |
| Number of Bits | 20 Bit |
| Propagation Delay Max (tpd) | 250 ps |
| Polarity | Non-Inverting |
| Voltage Nodes | 3.30 V, 2.50 V |
| Bandwidth | 200 MHz |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
The SN74CBTLV16210 provides 20 bits of high-speed bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.
●The device is organized as dual 10-bit bus switches with separate output-enable (OE\\\\) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When OE\ is low, the associated 10-bit bus switch is on, and port A is connected to port B. When OE\ is high, the switch is open, and the high-impedance state exists between the two ports.
●This device is fully specified for partial-power-down applications using Ioff. The Ioff feature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
●To ensure the high-impedance state during power up or power down, OE\ should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
TI
Low-Voltage 20Bit FET Bus Switch
TI
TEXAS INSTRUMENTS SN74CBTLV16210DL FET Bus Switch, 20Channels, 64mA, 2.3V to 3.6V, SSOP-48
TI
TEXAS INSTRUMENTS SN74CBTLV16210VR Bus Switch, 20Channels, 64mA, 2.3V to 3.6V, TVSOP-48
TI
Bus Switch 2Element CMOS 20IN 48Pin SSOP T/R
TI
TEXAS INSTRUMENTS SN74CBTLV16210GR Bus Switch, 20Channels, 64mA, 2.3V to 3.6V, TSSOP-48
TI
Bus Switch 2Element CMOS 20IN 48Pin TSSOP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
