SN74AVC8T245DGVR Datasheet PDF - TI

The SN74AVC8T245DGVR is a 8-bit dual-supply Bus Transceiver with configurable voltage-level shifting and 3-state outputs. The bus transceiver uses two separate configurable power-supply rails. It is optimized to operate with VCCA/VCCB set at 1.4 to 3.6V. The device is operational with VCCA/VCCB as low as 1.2V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation between any of the 1.2/1.5/1.8/2.5/3.3V voltage nodes. It is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the outputs so the buses are effectively isolated. It is designed so the control pins (DIR and OE) are supplied by VCCA.

● Control inputs VIH/VIL levels are referenced to VCCA voltage

● VCC Isolation - If either VCC input Is at GND, I/O ports are in high-impedance state

● IOFF Supports partial power-down mode operation

● Fully configurable dual-rail design allows each port to operate over full 1.4 to 3.6V power-supply

● I/Os are 4.6V tolerant

● Latch-up performance exceeds 100mA per JESD 78, class II

● Green product and no Sb/Br