The SN74AUC1G125DBVR is a single Bus Buffer Gate operates at 0.8 to 2.7V VCC, but is designed specifically for 1.65 to 1.95V VCC operation. The SN74AUC1G125 is a single line driver with a 3-state output. The output is disabled when the output-enable input is high. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
● IOFF supports partial-power-down mode operation
● Sub-1-V operable
● 10µA maximum ICC low power consumption
● ±8mA Output drive at 1.8V
● Optimized for 1.8V operation and Is 3.6V I/O tolerant to support mixed-mode signal operation
● Latch-up performance exceeds 100mA per JESD 78, class II
● Green product and no Sb/Br
