The DRV8830DGQR is a 1A Low Voltage Brushed DC Motor Driver with speed regulation (I²C Ctrl) provides an integrated motor driver solution. The device has one H-bridge driver and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFET"s configured as an H-bridge to drive the motor winding. Provided with sufficient PCB heat sinking, the DRV8830 can supply up to 1A of DC/RMS or peak output current. It operates on power supply voltages from 2.75 to 6.8V. To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided. The output voltage is programmed via an I²C-compatible interface, using an internal voltage reference and DAC. Internal protection functions are provided for over current, short-circuit, under-voltage lockout and over-temperature protection.
● H-bridge voltage-controlled motor driver
● Low MOSFET on-resistance
● 300nA Typical sleep mode current
● Serial I²C compatible interface
● Current limit circuit and fault output
● Green product and no Sb/Br
●ESD sensitive device, take proper precaution while handling the device.
