The UCC35701D is a Pulse Width Modulation (PWM) Controller intended for isolated switching power supplies using primary side control. They can be used for both off-line applications and DC/DC converter designs such as in a distributed power system architecture or as a telecom power source. It features low startup current, allowing for efficient off-line starting, yet have sufficient output drive to switch power MOSFETs in excess of 500kHz. Voltage feed forward compensation is operational over a 5:1 input range and provides fast and accurate response to input voltage changes over a 4:1 range. An accurate volt-second clamp and maximum duty cycle limit are also featured. Fault protection is provided by pulse by pulse current limiting as well as the ability to latch off after a programmable number of repetitive faults has occurred.
● Integrated oscillator/voltage feed forward compensation
● Accurate duty cycle limit
● Accurate volt-second clamp
● Optocoupler interface
● Fault counting shutdown
● Fault latch off or automatic shutdown
● Soft stop optimized for synchronous rectification
● 1A Peak gate drive output
● 130µA Start-up current
● 750µA Operating current
● Green product and no Sb/Br
