| TYPE | DESCRIPTION |
|---|
| Number of Pins | 10 Pin |
| Supply Voltage (DC) | 3.00 V to 4.30 V |
| Case/Package | SMD |
| Number of Channels | 2 Channel |
| Data Rate | 480 Mbps |
| Bandwidth | 955 MHz |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Reel |
The TS3USB30 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (955 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).
TI
High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable
TI
TEXAS INSTRUMENTS TS3USB30ERSWR Analog Switch, 2Channels, 10Ω, 3V to 4.3V, QFN, 10Pins
TI
High-Speed USB 2.0 (480Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single
TI
TEXAS INSTRUMENTS TS3USB3000RSER USB Interface, Switch, USB 2.0, 2.7V, 4.3V, UQFN, 10Pins
TI
DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) 6.1GHz Switch
TI
DP3T USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.5GHz) Switch
TI
Analog Multiplexer / Demultiplexer, 1:2, 2Circuits, 10Ω, 1µA, 3V to 4.3V, VSSOP-10
TI
USB Interface, High Speed 1:2 Mux/Demux, USB 2.0, 3V, 4.3V, UQFN, 10Pins
TI
DPDT USB 2.0 High-Speed and Mobile High-Definition Link (MHL) (6.1GHz) Switch 10-UQFN -40℃ to 85℃
TI
USB and Mobility Display Port Switch Dual 4.3V 0.06A 12Pin WQFN T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
