The TPS61175PWP is a High Voltage Boost Converter with soft-start and programmable switching frequency. The device can be configured in several standard switching-regulator topologies, including boost, SEPIC and flyback. The device has a wide input voltage range to support application with input voltage from multicell batteries or regulated 5, 12V power rails. The TPS61175 regulates the output voltage with current mode PWM (pulse width modulation) control. The switching frequency of PWM is set by either an external resistor or an external clock signal. The user can program the switching frequency from 200kHz to 2.2MHz. The device features a programmable soft-start function to limit inrush current during start-up and has other built-in protection features, such as pulse-by-pulse over-current limit and thermal shutdown.
● 3A 40V Internal switch
● High-efficiency power conversion (up to 93%)
● 200kHz to 2.2MHz Frequency set by external resistor
● Synchronous external switching frequency
● User-defined soft-start into full load
● Skip-switching cycle for output regulation at light load
● Green product and no Sb/Br
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
