| TYPE | DESCRIPTION |
|---|
| Number of Pins | 6 Pin |
| Supply Voltage (DC) | 4.50 V |
| Case/Package | WSON-6 |
| Output Current | 500 mA |
| Quiescent Current | 300 nA |
| Number of Regulated Outputs | 2 Output |
| Topology | Boost |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
The TPS610981DSET is a Synchronous Boost Converter with integrated LDO/load switch. It is suitable for products powered by either one-cell or two-cell alkaline, NiCd or NiMH, one-cell coin cell or one-cell li-ion or li-polymer battery. It integrates either a low-dropout linear regulator (LDO) or a load switch with a boost converter and provides two output rails. The boost output V(MAIN) is designed as an always-ON supply for a main system and the LDO or load switch output V(SUB) is to power peripheral devices. It has two modes controlled by MODE pin: active mode and low power mode. In Active mode, both outputs are enabled with enhanced response performance. In low power mode, the LDO or load switch is disabled to disconnect peripherals. It consumes only 300nA quiescent current and can achieve up to 88% efficiency at 10µA load in low power mode. It supports automatic pass-through function.
● Integrated LDO/load switch
● 2 Modes controlled by MODE pin
● 300nA Ultra-low power mode
● 350mA Minimum switch peak current limit
● Green product and no Sb/Br
TI
Low Input Voltage Synchronous Boost Converter with Integrated LDO/Load Switch 6-WSON -40℃ to 85℃
TI
Conv DC-DC 0.7V to 4.5V Step Up Single-Out 3.201V to 3.399V 0.05A Medical 6Pin WSON T/R
TI
TPS610981 DC to DC Converter and Switching Regulator Chip Evaluation Board
TI
Conv DC-DC 0.7V to 4.5V Step Up Single-Out 3.201V to 3.399V 0.05A Medical 6Pin WSON T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
