The TPS54418EVM-375 is an 3.3V Input, 1.8V Output, 4A SWIFT Converter Evaluation Module for the device TPS54418. The TPS54418EVM-375 evaluation module is designed to demonstrate the small printed circuit board areas that may be achieved when designing with the TPS54418 regulator. The TPS54418 dc/dc converter is designed to provide up to a 4A output from an input voltage source of 2.95V to 6V. Rated input voltage and output current range for the evaluation module are given in Table 1 of the Users Guide. The switching frequency is externally set at a nominal 1000KHz. The high side and low side MOSFETs are incorporated inside the TPS54418 package along with the gate drive circuitry. The low drain to source on resistance of the MOSFETs allow the TPS54418 to achieve high efficiencies and helps keep the junction temperature low at high output currents. The compensation components are external to the integrated circuit (IC), and an external divider allows for an adjustable output voltage.
● Two 30mR (typical) MOSFETs for high efficiency at 4A loads
● 200KHz to 2MHz Switching Frequency
● 0.8V ± 1% Voltage Reference Over Temperature
● synchronises to External Clock
● Adjustable Slow Start/Sequencing
● UV and OV Power Good Output
● Low Operating and Shutdown Quiescent Current
● Safe Start up into Pre Biased Output
● Cycle by Cycle Current Limit, Thermal and Frequency Fold Back Protection
