The TPS54360DDA is a step-down Voltage Regulator with an integrated high side MOSFET. The device survives load dump pulses up to 65V per ISO 7637. Current mode control provides simple external compensation and flexible component selection. A low ripple pulse skip mode reduces the no load supply current to 146µA. Shutdown supply current is reduced to 2µA when the enable pin is pulled low. Under-voltage lockout is internally set at 4.3V but can be increased using the enable pin. The output voltage start up ramp is internally controlled to provide a controlled start up and eliminate overshoot. A wide switching frequency range allows either efficiency or external component size to be optimized. Frequency fold-back and thermal shutdown protects internal and external components during an overload condition.
● Current Mode Control DC-DC Converter
● 92mR High-Side MOSFET
● High Efficiency at Light Loads with Pulse Skipping Eco-mode
● Low Dropout at Light Loads with Integrated BOOT Recharge FET
● 146µA Operating Quiescent Current
● 2µA Shutdown Current
● 100kHz to 2.5MHz Fixed Switching Frequency
● Synchronizes to External Clock
● Adjustable UVLO Voltage and Hysteresis
● Internal Soft-start
● Accurate Cycle-by-cycle Current Limit
● Thermal, Overvoltage and Frequency Fold-back Protection
● 0.8V, 1% Internal Voltage Reference
● Supported by WEBENCH Software Tool
● Green Product, No Sb/Br
●Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.