| TYPE | DESCRIPTION |
|---|
| Number of Pins | 6 Pin |
| Case/Package | SSOT |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 8.00 V |
| Number of Channels | 1 Channel |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tape & Reel (TR), Cut Tape (CT) |
The TPS27081ADDCR is a high-side Load Switch features industry-standard ESD protection on all pins providing better ESD compatibility with other on board components. The TPS27081A level shifts ON/OFF logic signal to VIN levels and supports as low as 1-V CPU or MCU logic to control higher voltage power supplies without requiring an external level-shifter. Switching a large value output capacitor CL through a fast ON/OFF logic signal may result in an excessive inrush current. To control the load inrush current, connect a resistor R2 and add an external capacitor C1 as shown in the Simplified Schematic. To configure the TPS27081A to achieve a specific slew rate, refer to the Application and Implementation section. A single pull-up resistor R1 is required in standby power switch applications. In such applications connect the R2 pin of the TPS27081A to the system ground when inrush current control is not required.
● Adjustable turn-on and turnoff slew rate control through external R1, R2 and C1
● Supports a wide range of 1.2 to 8V supply inputs
● Integrated NMOS for PFET control
● Full ESD protection (all pins)
● Low ON-resistance, high-current PFET
● Ultralow leakage current in standby (typical 100nA)
TI
1.2V - 8V, 3A PFET High Side Load Switch w/ Level Shift & Adj Slew Rate Control 6-SOT -40℃ to 85℃
TI
1.2V - 8V, 3A PFET High Side Load Switch w/ Level Shift & Adj Slew Rate Control
TI
1.2V - 8V, 3A PFET High Side Load Switch w/ Level Shift & Adj Slew ate Control 6-SOT -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
