The TPA3106D1EVM is a TPA3106D1 evaluation module, The TPA3106D1 is a single 40W, class-D, stereo audio power amplifier complete with a small number of external components mounted on a circuit board that can be used to directly drive speakers with an external analog audio source as the input. The gain of the amplifier is controlled by two gain select pins. The gain selections are 20dB, 26dB, 32dB, 36dB. The outputs are fully protected against shorts to GND, VCC, and output to output shorts with an auto recovery feature and monitor output.
● 40W Into an 8R load from a 24V supply
● Operates from 10V to 26V
● Efficient Class-D Operation eliminates the need for heat sinks
● Four selectable, fixed gain settings
● Differential inputs
● Thermal and short circuit protection with auto recovery feature
● Clock output for synchronization with sink when playing music
●Its important to operate this EVM within the input voltage range of 10V to 26V and the output voltage range of 0V to 26V. Exceeding the specified input voltage range may cause damage to the EVM.
