● High-Performance Static CMOS Technology
● 100 MHz (10-ns Cycle Time)
● 60 MHz (16.67-ns Cycle Time)
● Low-Power (1.8-V Core, 3.3-V I/O) Design
● JTAG Boundary Scan Support IEEE Standard 1149.1-1990 Standard Test Access Port and Boundary Scan Architecture
● High-Performance 32-Bit CPU (TMS320C28x)
● 16 x 16 and 32 x 32 MAC Operations
● 16 x 16 Dual MAC
● Harvard Bus Architecture
● Atomic Operations
● Fast Interrupt Response and Processing
● Unified Memory Programming Model
● Code-Efficient (in C/C++ and Assembly)
● On-Chip Memory
● F2809: 128K x 16 Flash, 18K x 16 SARAM F2808: 64K x 16 Flash, 18K x 16 SARAM F2806: 32K x 16 Flash, 10K x 16 SARAM F2802: 32K x 16 Flash, 6K x 16 SARAM F2801: 16K x 16 Flash, 6K x 16 SARAM F2801x: 16K x 16 Flash, 6K x 16 SARAM
● 1K x 16 OTP ROM (Flash Devices Only)
● C2802: 32K x 16 ROM, 6K x 16 SARAM C2801: 16K x 16 ROM, 6K x 16 SARAM
● Boot ROM(4K x 16)
● With Software Boot Modes (via SCI, SPI, CAN, I2C, and Parallel I/O)
● Standard Math Tables
● Clock and System Control
● Dynamic PLL Ratio Changes Supported
● On-Chip Oscillator
● Watchdog Timer Module
● Any GPIO A Pin Can Be Connected to One of the Three External CoreInterrupts
● Peripheral Interrupt Expansion (PIE) Block That Supports All 43 PeripheralInterrupts
● Endianness: LittleEndian
● 128-Bit Security Key/Lock
● Protects Flash/OTP/L0/L1 Blocks
● Prevents Firmware Reverse Engineering
● Three 32-Bit CPU Timers
● Enhanced Control Peripherals
● Up to 16 PWM Outputs
● Up to 6 HRPWM Outputs With 150-ps MEP Resolution
● Up to Four Capture Inputs
● Up to Two Quadrature Encoder Interfaces
● Up to Six 32-bit/Six 16-bit Timers
● Serial Port Peripherals
● Up to 4 SPI Modules
● Up to 2 SCI (UART) Modules
● Up to 2 CAN Modules
● One Inter-Integrated-Circuit (I2C) Bus
● 12-Bit ADC, 16 Channels
● 2 x 8 Channel Input Multiplexer
● Two Sample-and-Hold
● Single/Simultaneous Conversions
● Fast Conversion Rate: 80 ns - 12.5 MSPS (F2809 only) 160 ns - 6.25 MSPS (280x) 267 ns - 3.75 MSPS (F2801x)
● Internal or External Reference
● Up to 35 Individually Programmable, Multiplexed GPIO Pins With InputFiltering
● Advanced Emulation Features
● Analysis and Breakpoint Functions
● Real-Time Debug via Hardware
● Development Support Includes
● ANSI C/C++ Compiler/Assembler/Linker
● Code Composer Studio IDE
● DSP/BIOS
● Digital Motor Control and Digital Power Software Libraries
● Low-Power Modes and Power Savings
● IDLE, STANDBY, HALT Modes Supported
● Disable Individual Peripheral Clocks
● Package Options
● Thin Quad Flatpack (PZ)
● MicroStar BGA (GGM, ZGM)
● TemperatureOptions
● A: –40°C to 85°C (PZ, GGM, ZGM)
● S: –40°C to 125°C (PZ, GGM, ZGM)
● Q: –40°C to 125°C (PZ)
