| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 24 Pin |
| Case/Package | SSOP |
| Number of Outputs | 16 Output |
| Output Current | 45.0 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
The TLC59282DBQR is a 16-channel constant-current LED Driver with 4-channel grouped delay for noise reduction. Each channel can be individually controlled via a simple serial communications protocol that is compatible with 3.3 or 5V CMOS logic levels, depending on the operating VCC. Once the serial data buffer is loaded, a rising edge on LATCH transfers the data to the LEDs outputs. The BLANK pin can be used to turn-OFF all OUTn outputs during power-ON and output data latching to prevent unwanted image displays during these times. The constant-current value of all 16 channels is set by a single external resistor. Multiple TLC59282s can be cascaded together to control additional LEDs from the same processor.
● Constant-current sink output with ON/OFF control
● CMOS logic level I/O
● 30ns BLANK pulse width
● 0.31V at 20mA (typical) Low saturation voltage
● Green product and no Sb/Br
TI
16Channel, Constant-Current LED Driver with 4Channel Grouped Delay
TI
TEXAS INSTRUMENTS TLC59282DBQR LED Driver, Constant Current, 3V to 5.5V input, 16Outputs, 35MHz switch-freq., 45mA out, SSOP-24
TI
16Channel Constant Current LED Driver with 4Channel Grouped Delay 24-VQFN -40℃ to 85℃
TI
16Channel Constant Current LED Driver with 4Channel Grouped Delay 24-VQFN -40℃ to 85℃
TI
EVALUATION MODULE EVALUATING THE TLC5928 16Channel CONSTANT CURRENT LED DRIVER WITH 4Channel GROUPED DELAY
TI
16Channel Constant Current LED Driver with 4Channel Grouped Delay 24-SSOP -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
