STM8L151C4T6 Datasheet PDF - ST Microelectronics

The medium-density STM8L151x4/6 and STM8L152x4/6 devices are members of the STM8L ultra-low-power 8-bit family. The medium-density STM8L15x family operates from 1.8 V to 3.6 V (down to 1.65 V at power down) and is available in the -40 to +85 °C and -40 to +125 °C temperature ranges.

●The medium-density STM8L15x ultra-low-power family features the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations.

●The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive In-Application debugging and ultra-fast Flash programming.

●All medium-density STM8L15x microcontrollers feature embedded data EEPROM and low-power, low-voltage, single-supply program Flash memory.

●They incorporate an extensive range of enhanced I/Os and peripherals.

●The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools.

●Six different packages are proposed from 28 to 48 pins. Depending on the device chosen, different sets of peripherals are included.

●All STM8L ultra-low-power products are based on the same architecture with the same memory mapping and a coherent pinout.

●Key Features

● Operating conditions

● Operating power supply range 1.8 V to 3.6 V (down to 1.65 V at power down)

● Temp. range: - 40 °C to 85, 105 or 125 °C

● Low power features

● 5 low power modes: Wait, Low power run (5.1 μA), Low power wait (3 μA), Active-halt with full RTC (1.3 μA), Halt (350 nA)

● Consumption: 195 μA/MHz + 440 μA

● Ultra-low leakage per I/0: 50 nA

● Fast wakeup from Halt: 4.7 μs

● Advanced STM8 core

● Harvard architecture and 3-stage pipeline

● Max freq. 16 MHz, 16 CISC MIPS peak

● Up to 40 external interrupt sources

● Reset and supply management

● Low power, ultra-safe BOR reset with 5 selectable thresholds

● Ultra-low-power POR/PDR

● Programmable voltage detector (PVD)

● Clock management

● 1 to 16 MHz crystal oscillator

● 32 kHz crystal oscillator

● Internal 16 MHz factory-trimmed RC

● Internal 38 kHz low consumption RC

● Clock security system

● Low power RTC

● BCD calendar with alarm interrupt

● Auto-wakeup from Halt w/ periodic interrupt

● LCD: up to 4x28 segments w/ step-up converter

● Memories

● Up to 32 KB of Flash program memory and 1 Kbyte of data EEPROM with ECC, RWW

● Flexible write and read protection modes

● Up to 2 Kbyte of RAM

● DMA

● 4 channels; supported peripherals: ADC, DAC, SPI, I2C, USART, timers

● 1 channel for memory-to-memory

● 12-bit DAC with output buffer

● 12-bit ADC up to 1 Msps/25 channels

● T. sensor and internal reference voltage

● 2 ultra-low-power comparators

● 1 with fixed threshold and 1 rail to rail

● Wakeup capability

● Timers

● Two 16-bit timers with 2 channels (used as IC, OC, PWM), quadrature encoder

● One 16-bit advanced control timer with 3 channels, supporting motor control

● One 8-bit timer with 7-bit prescaler

● 2 watchdogs: 1 Window, 1 Independent

● Beeper timer with 1, 2 or 4 kHz frequencies

● Communication interfaces

● Synchronous serial interface (SPI)

● Fast I2C 400 kHz SMBus and PMBus

● USART (ISO 7816 interface and IrDA)

● Up to 41 I/Os, all mappable on interrupt vectors

● Up to 16 capacitive sensing channels supporting touchkey, proximity, linear touch and rotary touch sensors

● Development support

● Fast on-chip programming and non intrusive debugging with SWIM

● Bootloader using USART

● 96-bit unique ID