The STM32F334K8T6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 64kB and 16kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, two comparators, an operational amplifier, three DAC channels, four general-purpose 16-bit timers, one general-purpose 32-bit timer, as well as standard and advanced communication interfaces - one I²C, one SPI, two USARTs and a CAN.
● CRC calculation unit
● Power-on/Power-down reset (POR/PDR)
● Programmable voltage detector (PVD)
● Low-power modes - Sleep, stop, standby
● VBAT supply for RTC and backup registers
● 4 to 32MHz Crystal oscillator
● 32kHz Oscillator for RTC with calibration
● 8MHz Internal RC (up to 64 MHz with PLL option)
● 40kHz Internal oscillator
● Interconnect matrix
● 7-channel DMA Controller
● Temperature sensor
● Up to 18 capacitive sensing channels
● 2 x Watchdog timers (Independent and window)
● SysTick Timer
● Up to two 16-bit Basic timers to drive DAC
● Calendar RTC with alarm, periodic wakeup from stop
● CAN Interface (2.0 B Active) and one SPI
● Serial wire debug (SWD), JTAG
● 96-bit Unique ID
