| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole, PCB |
| Number of Pins | 3 Pin |
| Supply Voltage (DC) | 12.0 V |
| Current Rating | 30.0 mA |
| Case/Package | SIP |
| Output Current | 1.00 mA |
| Supply Current | 13.0 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Bulk |
| Material | Ceramic |
The SS94A1F is a linear hall-effect Sensor IC, provides increased temperature stability and performance. Laser trimmed thick film resistors on the ceramic substrate and thin film resistors on the integrated circuit reduce null and gain shifts over temperature which results in consistent sensitivity from one device to the next. The output is clamped at the high end. Clamping voltage may be as low as 9VDC. The output will not exceed the clamping voltage regardless of field strength or power supply.
● Single current sinking or current sourcing linear output
● Improved temperature stability
● Standard mounting centres
● Laser trimmed thin film and thick film resistor minimize sensitivity and compensate
Honeywell
16 Pages / 0.35 MByte
Honeywell
1 Pages / 0.05 MByte
Honeywell
1 Pages / 0.04 MByte
Honeywell
2 Pages / 0.2 MByte
Honeywell
1 Pages / 0.21 MByte
Honeywell
Honeywell Hall-effect Linear Sensor ICs: SS490 Series, Cost-reduced miniature ratiometric linear Hall-effect sensor IC, 3.125mV/G at 5V, Flat TO92 package, Formed leads 14,99mm [0.59in] long, Available in 5000 units tape in box (ammopack) version packaging
Honeywell
Honeywell Hall-effect Linear Sensor ICs: SS490 Series, Cost-reduced miniature ratiometric linear Hall-effect sensor IC, 3.125mV/G at 5V, Flat TO92 package, Straight leads 14,99mm [0.59in] long, Available in 5000 units tape in box (ammopack) version packaging
Honeywell
Hall Effect Sensor 1mA 8V 3Pin
Honeywell
Board Mount Hall Effect / Magnetic Sensors 4.5V to 8V 17.5mA Ceramic SIP
Honeywell
Linear Position Sensor 12.6V Analog(Voltage) Output 3Pin SIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
