| TYPE | DESCRIPTION |
|---|
| Number of Pins | 36 Pin |
| Case/Package | PowerSSO |
| Number of Outputs | 1 Output |
| Output Voltage | 6.50 V (min) |
| Output Current | 9.00 A |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Not Recommended for New Designs |
| Packaging | Cut Tape (CT) |
The SPV1020 is a monolithic 4-phase interleaved DC-DC Boost Converter designed to maximize the power generated by photovoltaic panels independent of temperature and amount of solar radiation. Optimization of the power conversion is obtained with embedded logic which performs the MPPT (max. power point tracking) algorithm on the PV cells connected to the converter. One or more converters can be housed in the connection box of the PV panels, replacing the bypass diodes. As the maximum power point is locally computed, the efficiency at system level is higher than that of conventional topologies, where the MPP is computed in the main centralized inverter. It operates at fixed frequency in PWM mode, where the duty cycle is controlled by the embedded logic running a Perturb&Observe MPPT algorithm.
● Duty cycle controlled by MPPT algorithm with 0.2% accuracy
● 6.5 to 40V Operating voltage range
● Overvoltage, overcurrent, over-temperature protection
● Interleaved 4-phase topology
● Built-in soft-start
● Up to 98% efficiency
● Power capability 320W at 40V output
● Automatic transition to burst mode for improved efficiency at low solar radiation
● SPI interface
ST Microelectronics
20 Pages / 0.31 MByte
ST Microelectronics
4 Pages / 0.09 MByte
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
