TYPE | DESCRIPTION |
---|
Mounting Style | Through Hole |
Frequency | 40.0 MHz |
Number of Pins | 16 Pin |
Supply Voltage (DC) | 4.75 V to 5.25 V |
Case/Package | DIP |
Output Current | 8.00 mA |
Number of Bits | 6 Bit |
Propagation Delay Max (tpd) | 27.0 ns |
Voltage Nodes | 5.00 V |
Output Current Drive | -50.0 µA |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
The SN74LS378N is a hex D-type Flip-flop with clock enable. It utilizes TTL circuitry to implement D-type flip-flop logic with an enable input. Information at the D inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock pulse if the enable input G\ is low. Clock triggering occurs at a particular voltage level and is not directly related to the transition time of the positive-going pulse. When the clock input is at either the high or low level, the D input signal has no effect at the output. It is designed to prevent false clocking by transitions at the G\ input. It is guaranteed to respond to clock frequencies ranging from 0 to 30MHz while maximum clock frequency is typically 40MHz. Typical power dissipation is 10mW per flip-flop.
● Individual data input to each flip-flop
● TTL Input and output
TI
Hex D-Type Flip-Flops with Clock Enable
TI
TEXAS INSTRUMENTS SN74LS378N Flip-Flop, with Clock Enable, Non Inverted, Positive Edge, 74LS378, D, 17ns, 40MHz, 8mA, DIP
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOIC Tube
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOIC T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin PDIP Tube
TI
Hex D-Type Flip-Flops with Clock Enable 16-SOIC 0 to 70
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 16Pin SOP T/R
TI
Hex D-Type Flip-Flops with Clock Enable 16-PDIP 0 to 70
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.