These devices are high speed hex buffers with 3-state outputs. They are organized as single 6-bit or 2-bit/4-bit, with inverting or non-inverting data (D) paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E) is LOW.
●When the Output Enable (E) is HIGH, the outputs are forced to a high impedance “off” state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.
ON Semiconductor
0.08 MByte
ON Semiconductor
0.27 MByte
TI
TEXAS INSTRUMENTS SN74LS368AD Hex Driver, Inverting, 6Channel, 4.75V to 5.25V, SOIC-16
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOIC T/R
TI
TEXAS INSTRUMENTS SN74LS368AN Buffer / Line Driver, Inverting, Hex Bus Driver , 3-State, 4.75V to 5.25V, DIP-16
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin PDIP Tube
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOIC T/R
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOIC Tube
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOP T/R
ON Semiconductor
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin PDIP Box
ON Semiconductor
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOIC Rail
TI
Buffer/Line Driver 6CH Inverting 3-ST Bipolar 16Pin SOP Tube
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
