| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 30.0 MHz |
| Number of Pins | 16 Pin |
| Digital Logic Level | TTL |
| Supply Voltage (DC) | 4.75 V to 5.25 V |
| Case/Package | PDIP |
| Clock Speed | 30.0 MHz |
| Number of Bits | 1 Bit |
| Voltage Nodes | 5.00 V |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The SN74LS292N is a programmable Frequency Divider or Digital Timer with 31 flip-flops plus 30-gates on a single chip. The count modulo is under digital control of the inputs provided. It feature an active-low clear input to initialize the state of all flip-flops. To facilitate incoming inspection, test points are provided. These test points are not intended to drive system loads. It feature two clock inputs; either one may be used for clock gating. A brief look at the digital timing capabilities of the LS292 will show that with a 1-MHz input frequency, programming for 210 will give a period of 1.024ms and 220 will give a period of 1.05sec. This device is easily cascadable giving limitless possibilities to timing delays that can be achieved.
● Count divider chain
● Digitally programmable from 22 to 2n
● Easily expandable
TI
these programmable frequency dividers/digital timers contain 31 flip-flops plus 30Gates ( ls292) or 15 flip-flops pl...
TI
Frequency Dividers/Digital Timers 0°C to 70℃ 16Pin PDIP Tube
TI
Programmable Frequency Divider / Digital Timer 16-PDIP 0 to 70
TI
Programmable Frequency Divider / Digital Timer 16-PDIP 0 to 70
TI
Programmable Frequency Dividers and Digital Timers
TI
Programmable Frequency Dividers and Digital Timers
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
