TYPE | DESCRIPTION |
---|
Mounting Style | Surface Mount |
Number of Pins | 20 Pin |
Supply Voltage (DC) | 4.50 V to 5.50 V |
Case/Package | TSSOP-20 |
Number of Outputs | 8 Output |
Number of Circuits | 8 Circuit |
Number of Bits | 8 Bit |
Propagation Delay Max (tpd) | 41.0 ns |
Polarity | Non-Inverting |
Voltage Nodes | 5.00 V |
Output Current Drive | -1.00 mA |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tape & Reel (TR) |
Store state information for later use by using the Texas Instruments SN74HCT574PWR flip flop device. With a 3-state output, this is power management at its best. It has a single-ended output signal. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. Tape and reel packaging will encase this product during shipment, in order to ensure safe delivery and enable quick mounting of components. It has 8 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.
TI
Octal Edge-Triggered D-Type Flip-Flops With 3-State Outputs
TI
TEXAS INSTRUMENTS SN74HCT574N Flip-Flop, Tri State Non Inverted, Positive Edge, 74HCT574, D, 35ns, 40MHz, 6mA, DIP
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin TSSOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin SOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin TSSOP T/R
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin PDIP Tube
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin SOIC T/R
TI
TEXAS INSTRUMENTS SN74HCT574DW Flip-Flop, Tri State Non Inverted, Positive Edge, 74HCT574, D, 35ns, 40MHz, 6mA, SOIC
TI
TEXAS INSTRUMENTS SN74HCT574PW Flip-Flop, Tri State Non Inverted, Positive Edge, 74HCT574, D, 35ns, 40MHz, 6mA, TSSOP
TI
Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1Element 20Pin SSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.