| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 25.0 MHz |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 2.00 V to 6.00 V |
| Case/Package | SOIC |
| Number of Outputs | 8 Output |
| Output Current | 5.20 mA |
| Number of Circuits | 8 Circuit |
| Number of Bits | 8 Bit |
| Propagation Delay Max (tpd) | 34.0 ns |
| Polarity | Non-Inverting |
| Voltage Nodes | 6.00 V, 5.00 V, 2.00 V |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
Are you looking to store information at a basic level? The SN74HC273DW flip flop device from Texas Instruments can easily save state information. It has a single-ended output signal. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. This device comes in tube packaging. It has 8 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 2 V, while its maximum is 6 V.
TI
Octal D-Type Flip-Flops With Clear
TI
Flip-Flop, with Clear, Non Inverted, Positive Edge, 74HC273, D, 13ns, 25MHz, 5.2mA, DIP
TI
TEXAS INSTRUMENTS SN74HC273NSR Flip-Flop, Non Inverted, Positive Edge, D, 13ns, 60MHz, 25mA, SOP, 20Pins
TI
Flip-Flop, with Clear, Non Inverted, Positive Edge, 74HC273, D, 12ns, 60MHz, 5.2mA, SOIC
TI
TEXAS INSTRUMENTS SN74HC273PWR Flip-Flop, Non Inverted, Positive Edge, 74HC273, D, 13ns, 60MHz, 25mA, TSSOP
TI
TEXAS INSTRUMENTS SN74HC273DBR Flip-Flop, Non Inverted, Positive Edge, 74HC273, D, 13ns, 25MHz, 5.2mA, SSOP
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin TSSOP T/R
TI
TEXAS INSTRUMENTS SN74HC273DW Flip-Flop, Non Inverted, Positive Edge, 74HC273, D, 13ns, 25MHz, 5.2mA, SOIC
TI
Flip Flop D-Type Bus Interface Pos-Edge 1Element 20Pin SOP T/R
TI
TEXAS INSTRUMENTS SN74HC273NE4 Flip-Flop, Non Inverted, Positive Edge, 74HC273, D, 13ns, 60MHz, 5.2mA, DIP
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
