| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 2.00 V to 6.00 V |
| Case/Package | SOP |
| Number of Outputs | 8 Output |
| Number of Circuits | 8 Circuit |
| Number of Bits | 8 Bit |
| Propagation Delay Max (tpd) | 22.0 ns |
| Voltage Nodes | 6.00 V, 5.00 V, 2.00 V |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
The SN74HC245NSR is an octal Bus Transceiver with 3-state outputs and designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
● High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads
● 80µA maximum ICC low power consumption
● 12ns typical Propagation delay (tpd)
● ±6mA Output drive at 5V
● 1µA maximum Low input current
● Green product and no Sb/Br
TI
Octal Bus Transceivers With 3-State Outputs
TI
Transceiver, 74HC245, 2V to 6V, DIP-20
TI
TEXAS INSTRUMENTS SN74HC245DW Transceiver, 74HC245, 2V to 6V, SOIC-20
TI
Transceiver, 74HC245, 2V to 6V, SOP-20
TI
Transceiver, 74HC245, 2V to 6V, TSSOP-20
TI
Transceiver, 74HC245, 2V to 6V, SOIC-20
TI
Transceiver, 74HC245, 2V to 6V, SSOP-20
TI
IC BUS TRANSCEIVER 8Bit 20DIP
TI
IC BUS TRANSCEIVER 8Bit 20SO
TI
TEXAS INSTRUMENTS SN74HC245PW Transceiver, 74HC245, 2V to 6V, TSSOP-20
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
