| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 100 MHz |
| Number of Pins | 16 Pin |
| Supply Voltage (DC) | 4.50 V to 5.50 V |
| Case/Package | 16PDIP |
| Output Current | 20.0 mA |
| Number of Circuits | 2 Circuit |
| Number of Bits | 2 Bit |
| Propagation Delay Max (tpd) | 7.50 ns |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -50.0 µA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
Texas Instruments brings you their latest SN74F112N flip flop device, a simple yet effective method for storing your circuit"s state information. It has a differential output signal. This flip flop has a minimum operating temperature of 0 °C and a maximum of 70 °C. This device comes in tube packaging. It has 2 channels per chip. This inverting/non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.
TI
DUAL NEGATIVE-EDGE-TRIGGERED J-K FLIP-FLOP WITH CLEAR AND PRESET
TI
TEXAS INSTRUMENTS SN74F112N Flip-Flop, Complementary, Differential, Negative Edge, 74F112, JK, 4.6ns, 100MHz, 20mA, DIP
TI
TEXAS INSTRUMENTS SN74F112D Flip-Flop, 74F112, JK, 4.6ns, 130MHz, 20mA, SOIC
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOP T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOP T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin PDIP Tube
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOP T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC T/R
TI
Flip Flop JK-Type Neg-Edge 2Element 16Pin SOIC T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
