| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 1.65 V (min) |
| Case/Package | TSSOP |
| Number of Circuits | 8 Circuit |
| Number of Bits | 8 Bit |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
The SN74ALVC245PWR is an octal Bus Transceiver with 3-state outputs and designed for 1.65 to 3.6V VCC operation. The SN74ALVC245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
● 3.4ns at 3.3V Propagation delay (tpd)
● ±24mA Output drive at 3.3V
● Latch-up performance exceeds 250mA per JESD 17
● Green product and no Sb/Br
TI
this octal bus transceiver is designed for 1.65V to 3.6V vcc operation. the sn74alvc245 is designed for asynchronou...
TI
Octal Bus Transceiver With 3-State Outputs 20-SOIC -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-TSSOP -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-TSSOP -40℃ to 85℃
TI
TEXAS INSTRUMENTS SN74ALVC245DWR Transceiver, Non-Inverting, 1.65V to 3.6V, SOIC-20
TI
Octal Bus Transceiver With 3-State Outputs 20-TSSOP -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-VQFN -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-SO -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-TVSOP -40℃ to 85℃
TI
Octal Bus Transceiver With 3-State Outputs 20-TSSOP -40℃ to 85℃
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
