TYPE | DESCRIPTION |
---|
Number of Pins | 20 Pin |
Supply Voltage (DC) | 4.50 V to 5.50 V |
Case/Package | 20TSSOP |
Number of Outputs | 8 Output |
Output Current | 8.00 mA |
Number of Bits | 8 Bit |
Propagation Delay Max (tpd) | 9.50 ns |
Voltage Nodes | 5.00 V |
Number of Gates | 8 Gate |
Output Current Drive | -1.00 mA |
TYPE | DESCRIPTION |
---|
Product Lifecycle Status | Active |
Packaging | Tube, Rail |
The SN74AHCT541PW is an octal Buffer/Driver with 3-state outputs. It is ideal for driving bus lines or buffer memory address registers. This device features inputs and outputs to facilitate printed circuit board layout. The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable input is high, all corresponding outputs are in the high-impedance state. The outputs provide non-inverted data when they are not in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.
● Inputs are TTL-voltage compatible
● Latch-up performance exceeds 250mA per JESD 17
● Green product and no Sb/Br
TI
the ahct541 octal buffers/drivers are ideal for driving bus lines or buffer memory address registers. these devices f...
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin TSSOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin PDIP Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SSOP T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC Tube
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC T/R
TI
Buffer/Line Driver 8CH Non-Inverting 3-ST CMOS 20Pin SOIC T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.