| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Number of Pins | 20 Pin |
| Supply Voltage (DC) | 4.50 V to 5.50 V |
| Case/Package | DIP |
| Number of Outputs | 8 Output |
| Output Current | 24.0 mA |
| Number of Circuits | 8 Circuit |
| Number of Bits | 8 Bit |
| Propagation Delay Max (tpd) | 9.00 ns |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The SN74ACT245N is an octal Bus Transceiver with 3-state outputs. It is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. When the OE\ is low, the device passes non-inverted data from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. A high on OE\ disables the device so that the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.
● Maximum tpd of 8ns at 5V
● Inputs are TTL-voltage compatible
TI
Octal Bus Transceivers With 3-State Outputs
TI
TEXAS INSTRUMENTS SN74ACT245DWR Transceiver, 74ACT245, 4.5V to 5.5V, SOIC-20
TI
Logic IC - Receiver, transceiver Texas Instruments SN74ACT245PWR TSSOP 20
TI
TEXAS INSTRUMENTS SN74ACT245DBR Bus Transceiver, 74ACT245, 8Channels, 4.5V to 5.5V, SSOP-20
TI
TEXAS INSTRUMENTS SN74ACT245DW Bus Transceiver, 74ACT245, 8Channels, 24mA, 4.5V to 5.5V, SOIC-20
TI
TEXAS INSTRUMENTS SN74ACT245N Bus Transceiver, 74ACT245, 8Channels, 24mA, 4.5V to 5.5V, DIP-20
TI
TEXAS INSTRUMENTS SN74ACT245PW Transceiver, 74ACT245, 4.5V to 5.5V, TSSOP-20
TI
IC BUS TRANSCEIVER 8Bit 20SOIC
TI
IC BUS TRANSCEIVER 8Bit 20TSSOP
TI
IC BUS TRANSCEIVER 8Bit 20SO
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
