| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Frequency | 160 MHz |
| Number of Pins | 14 Pin |
| Supply Voltage (DC) | 2.00 V to 6.00 V |
| Case/Package | SOIC |
| Output Current | 50.0 mA |
| Number of Circuits | 2 Circuit |
| Number of Bits | 2 Bit |
| Propagation Delay Max (tpd) | 10.5 ns |
| Polarity | Non-Inverting, Inverting |
| Voltage Nodes | 5.00 V, 3.30 V |
| Output Current Drive | -1.00 mA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Cut Tape (CT) |
Store state information for later use by using the Texas Instruments SN74AC74DR flip flop device. It has a differential output signal. This flip flop has a minimum operating temperature of -40 °C and a maximum of 85 °C. This product will be shipped in tape and reel packaging to allow for quick mounting and safe delivery. This inverting/non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 6 V. It has 2 channels per chip.
TI
DUAL POSITIVE-EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH CLEAR AND PRESET
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin PDIP Tube
TI
TEXAS INSTRUMENTS SN74AC74DR Flip-Flop, Complementary, Positive Edge, 74AC74, D, 6ns, 160MHz, 50mA, SOIC
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin SOIC Tube
TI
* 2V to 6V VCC Operation * Inputs Accept Voltages to 6V * Max tpd of 10ns at 5V
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin TSSOP Tube
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin PDIP Tube
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin SSOP T/R
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin TSSOP T/R
TI
Flip Flop D-Type Pos-Edge 2Element 14Pin TSSOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
