| TYPE | DESCRIPTION |
|---|
| Mounting Style | Surface Mount |
| Number of Pins | 14 Pin |
| Supply Voltage (DC) | 4.50 V to 5.50 V |
| Case/Package | 14SOIC |
| Number of Outputs | 4 Output |
| Output Current | 64.0 mA |
| Number of Circuits | 4 Circuit |
| Number of Bits | 4 Bit |
| Propagation Delay Max (tpd) | 6.30 ns |
| Voltage Nodes | 5.00 V |
| Output Current Drive | -500 µA |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tube |
The SN74ABT126D is a quadruple bus Buffer Gate features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low. When VCC is between 0 and 2.1V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1V, OE should be tied to GND through a pull-down resistor and the minimum value of the resistor is determined by the current-sourcing capability of the driver.
● High-impedance state during power up and power down
● IOFF and power-up 3-state support hot insertion
● Latch-up performance exceeds 500mA per JESD-17
● <1V at VCC = 5V, TA = 25°C VOLP (output ground bounce)
● Green product and no Sb/Br
TI
Quadruple Bus Buffer Gates With 3-State Outputs
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin TSSOP Tube
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SOIC T/R
TI
TEXAS INSTRUMENTS SN74ABT126D Transceiver, 74ABT126, 4.5V to 5.5V, SOIC-14
TI
Transceiver, 74ABT126, 4.5V to 5.5V, QFN-14
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin TSSOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SOIC T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SSOP T/R
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin PDIP Tube
TI
Buffer/Line Driver 4CH Non-Inverting 3-ST BiCMOS 14Pin SOP T/R
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
