The SN65LVDS389DBT is an octal differential Line Driver implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3.3V supply rail. Any of the 16 current-mode drivers will deliver a minimum differential output voltage magnitude of 247mV into a 100R load when enabled. When disabled, the driver outputs are high-impedance. Each driver input (A) and enable (EN) have an internal pull-down that will drive the input to a low level when open-circuited.
● Very low radiation (EMI)
● Low-voltage differential signaling with typical output voltage of 350mV and a 100R load
● Driver is high-impedance when disabled or with VCC <1.5V
● Bus-pin ESD protection exceeds 15kV
● 630Mbps Signalling rate
● <2.9ns Propagation delay time
● <150ps Output skew
● <1.5ns Part-to-part skew
● 35mW at 200MHz Total power dissipation in each driver
● Green product and no Sb/Br
