SN65175D Datasheet PDF - TI

The SN65175D is a quadruple monolithic differential Line Receiver with 3-state outputs. It is designed to meet the requirements of ANSI standards EIA/TIA-422-B, RS-423-B, RS-485 and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10Mbps. Each of the two pairs of receivers has a common active-high enable. The receiver features high input impedance, input hysteresis for increased noise immunity and input sensitivity of ±200mV over a common-mode input voltage range of ±12V. The SN65175 is designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

● Designed for multi-point bus transmission on long bus lines in noisy environments

● Low-power requirements

● Operate from a single 5V supply

● ±200mV Input sensitivity

● 50mV Typical input hysteresis

● 12kR Minimum high input impedance

● 2kV HBM ESD

● 32 Number of nodes

● Green product and no Sb/Br