The S29JL032J70TFI320 is a 32MB simultaneous Read/Write Flash Memory organized as 2097152 words of 16-bit each or 4194304 bytes of 8-bit each. Word mode data appears on DQ15-DQ0, byte mode data appears on DQ7-DQ0. The device is designed to be programmed in-system with the standard 3V VCC supply and can also be programmed in standard EPROM programmers. The device is available with an access time of 70ns. Standard control pins - chip enable (CE#), write enable (WE#) and output enable (OE#) - control normal read and write operations and avoid bus contention issues. The device requires only a single 3V power supply for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations.
● Bottom boot device, 2 banks - 8/24MB
● Data can be continuously read from one bank while executing erase/program functions in another bank
● Zero latency between read and write operations
● Multiple bank architecture
● Manufactured on 0.11µm process technology
● Zero power operation
● Compatible with JEDEC standards
● Pinout and software compatible with single-power-supply flash standard
● Cycling endurance - 1million cycles per sector typical
● Data retention - 20 years typical
● Supports common flash memory interface
● Erase suspend/erase resume
● Data# polling and toggle bits
● Provides a software method of detecting the status of program or erase operations
● Unlock bypass program command - Reduces overall programming time
● Ready/busy# output - Hardware method for detecting program or erase cycle completion
● Hardware reset pin - Hardware method of resetting the internal state machine to the read mode
● WP#/ACC input pin - Acceleration function accelerates program timing
● Write protect function protects the two outermost boot sectors regardless of sector protect status
● Hardware method to prevent any program or erase operation within a sector
