The PTN04050CAH is a 1-output through hole-mount non-isolated Step-up DC to DC Converter that delivers up to 12W of output power. The PTN04050C is smaller and lighter than its predecessors and has either similar or improved electrical performance characteristics. Operating over a 2.95 to 5.5V input range, the PTN04050C provides high-efficiency, step-up voltage conversion for loads of up to 12W. The output voltage is set using a single external resistor. The PTN04050C may be set to any value within the range, 5 to 15V. The output voltage of the PTN04050C can be as little as 0.5V higher than the input, allowing an output voltage of 5V, with an input voltage of 4.5V. The PTN04050C modules are suited to a wide variety of general-purpose applications that operate off 3.3 or 5V DC power.
● Wide input voltage range
● Wide output voltage adjust
● Exhibits improved thermal characteristics
● High efficiency (up to 90%)
● -40 to 85°C Operating temperature range
●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
