| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 350 kHz |
| Number of Pins | 10 Pin |
| Supply Voltage (DC) | 12.0 V |
| Case/Package | 10DIPMODULE |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 10.8 V to 13.2 V |
| Output Voltage | 5.50 V |
| Output Current | 10.0 A, 10.0 A (max) |
| Number of Regulated Outputs | 1 Output |
| Topology | Buck |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tray |
| Size-Length | 25.3 mm |
| Size-Width | 15.8 mm |
| Size-Height | 9.00 mm |
The PTH12060WAH is a 1-output 55W through hole-mount non-isolated adjust Power Module for use with complex digital. This module is small in size and are an alternative for applications requiring up to 10A of load current. The small footprint, (1 x 0.62 inch) and industry leading features makes this module suitable for space conscious digital systems that incorporate multiple processors. This series of modules operate from a 12V input bus voltage to provide step-down power conversion to a wide range of output voltages. The output voltage of the W-suffix device may be set to any voltage over the adjust range, 1.2 to 5.5V. The L-suffix device has an adjustment range of 0.8 to 1.8V. The output voltage is set within the adjust range using a single external resistor. This product includes Auto-Track™ Sequencing. Auto-Track simplifies the task of supply voltage sequencing in a power system, by enabling modules to track each other or any other external voltage, during power up and power
● 12V Input voltage
● Efficiencies up to 95%
● 225W/inch³ Power density
● Output voltage sense
● Margin up/down controls
● Under-voltage lockout
● Auto-Track sequencing
● Pre-bias start-up capability using ON/OFF inhibit
● Output overcurrent protection (non-latching, auto-reset)
● Point-of-Load Alliance (POLA) compatible
● Wide-output
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
