| TYPE | DESCRIPTION |
|---|
| Frequency | 320 kHz |
| Number of Pins | 6 Pin |
| Supply Voltage (DC) | 12.0 V |
| Case/Package | 6-DIP Module |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 10.8 V to 13.2 V |
| Output Voltage | 5.50 V, 1.20 V (min) |
| Output Current | 6.00 A |
| Number of Regulated Outputs | 1 Output |
| Topology | Buck |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Size-Width | 12.6 mm |
| Size-Height | 8.50 mm |
The PTH12050WAD is a 1-output 33W through hole-mount non-isolated adjust Power Module with Auto-Track™ sequencing. Auto-Track simplifies the sequencing of supply voltages in power systems by enabling modules to track each other or any other external voltage, during power up and power down. Although small in size (0.87 x 0.5 inches), these modules are rated for up to 6A of output current and are an ideal choice in applications where space, performance and a power-up sequencing capability are important attributes. The series operates from an input voltage of 12V to provide step-down conversion to a wide range of output voltages. The output voltage of the W-suffix device may set to any voltage over the adjust range, 1.2 to 5.5V. The L-suffix device has an adjustment range of 0.8 to 1.8V. The output voltage is set within the adjustment range using a single external resistor. Other operating features include an ON/OFF inhibit, output voltage adjust (trim) and output overcurrent protec
● ON/OFF inhibit
● Under-voltage lockout
● Output overcurrent protection (non-latching, auto-reset)
● Point-of-load alliance (POLA) compatible
● Wide-output
● 12V Input voltage
● Efficiencies up to 93%
● 200W/inch³ Power density
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
