| TYPE | DESCRIPTION |
|---|
| Mounting Style | Through Hole |
| Frequency | 300 kHz |
| Number of Pins | 6 Pin |
| Case/Package | DIP |
| Number of Outputs | 1 Output |
| Input Voltage (DC) | 4.50 V to 14.0 V |
| Output Voltage | 5.50 V, 900 mV (min) |
| Output Current | 2.25 A |
| Number of Regulated Outputs | 1 Output |
| Topology | Buck |
| TYPE | DESCRIPTION |
|---|
| Product Lifecycle Status | Active |
| Packaging | Tray |
| Size-Length | 18.9 mm |
| Size-Width | 12.6 mm |
| Size-Height | 8.50 mm |
The PTH08000WAH is a 12.37W through hole-mount non-isolated adjust Module with Auto-Track™. The PTH08000W is a highly integrated switching regulator module that delivers up to 2.25A of output current. The PTH08000W sources output current at a much higher efficiency than a TO-220 linear regulator IC, eliminating the need for a heat sink. The input voltage range of the PTH08000W is 4.5 to 14V, allowing operation from either a 5 or 12V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTH08000W can step down to voltages as low as 0.9V from a 5V input bus, with less than 1W of power dissipation. The output voltage can be adjusted to any voltage over the range, 0.9 to 5.5V, using a single external resistor. This feature simplifies the task of supply voltage sequencing in a power system by enabling modules to track each other or any external voltage, during power up and power down.
● ON/OFF inhibit
● Under-voltage lockout (UVLO)
● Output overcurrent protection (non-latching, auto-reset)
● Over-temperature protection
● 94% Efficiency
TI
Module DC-DC 1Out 0.9V to 5.5V 2.25A 6Pin DIP Module
TI
Module DC-DC 1Out 0.9V to 5.5V 2.25A 6Pin DIP Module
TI
Module DC-DC 1Out 0.9V to 5.5V 2.25A 6Pin DIP Module T/R
TI
Module DC-DC 1Out 0.9V to 5.5V 2.25A 6Pin DIP Module
TI
Module DC-DC 1Out 0.9V to 5.5V 2.25A 6Pin DIP Module T/R
TI
2.25A, WIDE INPUT, ADJUSTABLE SWITCHING REGULATOR
Part Datasheet PDF Search
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.
