The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC and dsPIC flash microcontrollers, using the powerful graphical user interface of the MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected to the design engineer"s computer using a high-speed 2.0 USB interface and can be connected to the target via an 8-pin Single In-Line (SIL) connector. The connector uses two device I/O pins and the reset line to implement in-circuit debugging and In-Circuit Serial Programming (ICSP). An additional micro SD card slot and the ability to be self-powered from the target means you can take your code with you and program on the go. The MPLAB PICkit 4 programs faster than its predecessor and comes ready to support PIC® and dsPIC® MCU devices. Along with a wider target voltage, the PICkit 4 supports advanced interfaces such as 4-wire JTAG and Serial Wire Debug with streaming Data Gateway, while being backw
● Matches silicon clocking speed, programming as fast as the device will allow
● Wide target voltage range of 1.2V to 5.5V
● Can supply up to 50mA of power to the target
● Minimal current consumption at <100µA from target
● Portable USB-powered via high-speed USB 2.0, no external power required
● Can be powered from the target to program in the field (coming soon via firmware update)
● CE and RoHS compliant
● Supports advanced interfaces such as 4-wire JTAG and serial wire debug with streaming data gateway
● Backwards compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP
● Programmer-to-Go (PTG) support (coming soon via firmware update)
● Ease of maintenance and feature upgrade
