PCI1410 Datasheet PDF - TI

The TI™ PCI1410 is a high-performance PCI-to-PC Card controller that supports a single PC Card socket compliant with the _1997 PC Card Standard_. The PCI1410 provides features that make it the best choice for bridging between PCI and PC Cards in both notebook and desktop computers. The _1997 PC Card Standard_ retains the 16-bit PC Card specification defined in _PCI Local Bus Specification_ and defines the new 32-bit PC Card, CardBus, capable of full 32-bit data transfers at 33 MHz. The PCI1410 supports both 16-bit and CardBus PC Cards, powered at 5 V or 3.3 V, as required.

●The PCI1410 is compliant with the _PCI Local Bus Specification_, and its PCI interface can act as either a PCI master device or a PCI slave device. The PCI bus mastering is initiated during 16-bit PC Card DMA transfers or CardBus PC Card bridging transactions. The PCI1410 is also compliant with the latest _PCI Bus Power Management Interface Specification_ and _PCI Bus Power Management Interface Specification for PCI to CardBus Bridges_.

●All card signals are internally buffered to allow hot insertion and removal without external buffering. The PCI1410 is register compatible with the Intel™ 82365SL-DF and 82365SL ExCA controllers. The PCI1410 internal data path logic allows the host to access 8-, 16-, and 32-bit cards using full 32-bit PCI cycles for maximum performance. Independent buffering and a pipeline architecture provide an unsurpassed performance level with sustained bursting. The PCI1410 can also be programmed to accept fast posted writes to improve system-bus utilization.

●Multiple system-interrupt signaling options are provided, including: parallel PCI, parallel ISA, serialized ISA, and serialized PCI. Furthermore, general-purpose inputs and outputs are provided for the board designer to implement sideband functions. Many other features designed into the PCI1410, such as socket activity light-emitting diode (LED) outputs, are discussed in detail throughout the design specification.

●An advanced complementary metal-oxide semiconductor (CMOS) process achieves low system power consumption while operating at PCI clock rates up to 33 MHz. Several low-power modes enable the host power management system to further reduce power consumption.

● Ability to wake from D3hot and D3cold

● Fully compatible with the Intel 430TX (Mobile Triton II) chipset

● A 144-terminal low-profile QFP (PGE), 144-terminal MicroStar BGA™ ball grid array (GGU) package, or 209-terminal MicroStar BGA™ (GHK) package

● 3.3-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments

● Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards

● Single PC Card or CardBus slot with hot insertion and removal

● Burst transfers to maximize data throughput on the PCI bus and the CardBus bus

● Parallel PCI interrupts, parallel ISA IRQ and parallel PCI interrupts, serial ISA IRQ with parallel PCI interrupts, and serial ISA IRQ and PCI interrupts

● Serial EEPROM interface for loading subsystem ID and subsystem vendor ID

● Pipelined architecture allows greater than 130-Mbps sustained throughput from CardBus to PCI and from PCI to CardBus

● Interface to parallel single-slot PC Card power interface switches like the TI TPS2211

● Up to five general-purpose I/Os

● Programmable output select for CLKRUN\

● Five PCI memory windows and two I/O windows available to the 16-bit PC Card socket

● Two I/O windows and two memory windows available to the CardBus socket

● Exchangeable card architecture (ExCA) compatible registers are mapped in memory and I/O space

● Intel 82365SL-DF and 82365SL register compatible

● Distributed DMA (DDMA) and PC/PCI DMA

● 16-Bit DMA on the PC Card socket

● Ring indicate, SUSPEND\, PCI CLKRUN\, and CardBus CCLKRUN\

● Socket activity LED pins

● PCI bus lock (LOCK\\)

● Advanced submicron, low-power CMOS technology

● Internal ring oscillator

●MicroStar BGA, TI are trademarks of Texas Instruments.

●Intel is a trademark of Intel Corporation.