The OPA380AIDG4 is a high speed precision Transimpedance Amplifier provides high-speed (90MHz gain bandwidth (GBW)) operation, with extremely high precision, excellent long-term stability and very low 1/f noise. It is ideally suited for high-speed photodiode applications. The OPA380 features an offset voltage of 25µV, offset drift of 0.1µV/°C and bias current of 50pA. The OPA380 far exceeds the offset, drift and noise performance that conventional JFET operational amplifier provide. The signal bandwidth of a transimpedance amplifier depends largely on the GBW of the amplifier and the parasitic capacitance of the photodiode, as well as the feedback resistor. The 90MHz GBW of the OPA380 enables a transimpedance bandwidth of >1MHz in most configurations. The OPA380 is ideally suited for fast control loops for power level on an optical fibre.
● Excellent long term VOS stability
● 50pA Maximum bias current
● 25µv Maximum offset voltage
● 4 to 5 Decades dynamic range
● 0.1µV/°C Maximum drift
● 2.7 to 5.5V Supply range
● Green product and no Sb/Br
●This IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
