The NE5534P is a high-performance low-noise high-speed audio Operational Amplifier, combines excellent DC and AC characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion and high slew rate. This operational amplifier is compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The device features input-protection diodes, output short-circuit protection and offset-voltage nulling capability with use of the BALANCE and COMP/BAL pins. For the NE5534A and SA5534A devices, a maximum limit is specified for the equivalent input noise voltage.
● 3.5nV/√Hz Typical equivalent input noise voltage
● 10MHz Typical unity-gain bandwidth
● 100dB Typical common-mode rejection ratio
● 100V/mV Typical high DC voltage gain
● Peak-to-peak output voltage swing 32V typical
● With VCC± = ±18V and RL = 600R
● 13V/µs Typical high slew rate
● ±3 to ±20V Wide supply-voltage range
● Low harmonic distortion
● Offset nulling capability
● External compensation capability
●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
