The MIC29302WT is a high-current, high-accuracy, low-dropout Voltage Regulator. Using Micrel"s proprietary Super βeta PNP® process with a PNP pass element, these regulators feature 350mV to 425mV (full load) typical dropout voltages and very low ground current. Designed for high-current loads, these devices also find applications in lower current, extremely low dropout-critical systems, where their tiny dropout voltage and ground current values are important attributes. This is fully protected against over-current faults, reversed input polarity, reversed lead insertion, over-temperature operation and positive and negative transient voltage spikes. Five-pin fixed voltage versions feature logic-level on/off control and an error flag which signals whenever the output falls out of regulation. Flagged states include low input voltage (dropout), output current limit, over-temperature shutdown and extremely high voltage spikes on the input.
● High current capability
● Low ground current
● Accurate 1% guaranteed tolerance
● Extremely fast transient response
● Reverse-battery and load dump protection
● Zero-current shutdown mode (5-pin versions)
● Error flag signals output out-of-regulation (5-pin versions)
● Fixed voltage and adjustable versions
●ESD sensitive device, take proper precaution while handling the device.
