The MCP2510-I/SO is a 18-pin stand-alone CAN (Control Area Network) Controller with SPI™ Interface. It features an industry standard SPI serial interface, enabling an easy connection to virtually any microcontroller. The MCP2510 provides immediate CAN support across the entire breadth of Microchip"s 100+ PICmicro® microcontrollers, providing a seamless migration path and maximum design flexibility for CAN designs. The MCP2510 contains on-board features, such as interrupt capability, message masking and filtering, message prioritization, multi-purpose I/O pins and multiple transmit/receive buffers which significantly offload the microcontroller overhead required to handle CAN message traffic.
● Data byte filtering
● Start-of-frame (SOF) output
● Implements full CAN V2.0A and V2.0B at 1Mb/s
● 0 to 8-byte Message length
● Standard and extended data frames
● Programmable bit rate up to 1Mbps
● Support for remote frames
● Two receive buffers with prioritized message storage
● Six full acceptance filters
● Two full acceptance filter masks
● Three transmit buffers with prioritization and abort features
● Loop-back mode for self test operation
● Supports SPI modes 0,0 and 1,1
● Clock out pin with programmable prescaler
● Interrupt output pin with selectable enables
● Buffer full output pins configurable as interrupt pins
● Low power CMOS technology
●ESD sensitive device, take proper precaution while handling the device.
