MCB1343 is a Keil MCB1000 evaluation board which enables to create and test working programs based on the NXP LPC1343FBD48 ARM Cortex-M3 processor based device. The NXP LPC1343FBD48 microcontroller provided with the MCB1000 board is a high end Cortex-M device with advanced ADC and serial I/O capabilities. This device include a serial wire debug interface for downloading and debugging. They do not support a JTAG interface. A 12MHz crystal provides the clock signal for the CPU. The Cortex debug connector provides support for serial wire debug feature of the Cortex-M device. The MCB1000 board connects the on chip serial UART to the ST3232 which converts the logic signals to RS232 voltage levels.
● 72MHz LPC1343FBD48 ARM Cortex-M3 processor based MCU in 48 pin LQFP
● On chip memory of 32KB flash and 8KB RAM
● External memory 8KB EEPROM accessible via I2C bus
● Solar power can optionally provide power to the board
● Temperature digital sensor for monitoring board temperature
● USB 2.0 full speed interface and USB micro AB connector
● SPI Port via 20 pin connector
● 42 GPIO pins
● 10 pin Cortex debug interface connector
●Do not attach additional power supplies (such as batteries) while the USB supplies power to the MCB1000. This may harm the PC.
